Malty Simple Camera Rig Crack ((EXCLUSIVE))ed
DOWNLOAD >>> https://tiurll.com/2tuVMl
How to Fix a Malty Simple Camera Rig That Cracked
If you own a Malty Simple Camera Rig, you know how versatile and easy to use it is. It allows you to mount your camera on a tripod, slider, crane, or any other device with a standard 1/4 inch screw. It also has a ball head that lets you adjust the angle and orientation of your camera with a single knob.
However, some users have reported that their Malty Simple Camera Rig cracked after using it for a while. This can be very frustrating and potentially damage your camera or other equipment. Fortunately, there is a way to fix it without spending too much money or time.
In this article, we will show you how to repair a Malty Simple Camera Rig that cracked using some common tools and materials. You will need:
A small Phillips screwdriver
A small flathead screwdriver
A pair of pliers
A drill with a 3/16 inch bit
A 1/4 inch nut and bolt
Some epoxy glue
Follow these steps to fix your Malty Simple Camera Rig:
Remove the ball head from the base by unscrewing the knob at the bottom.
Use the Phillips screwdriver to remove the four screws that hold the base together.
Separate the two halves of the base and locate the crack. It should be on the side where the ball head attaches.
Use the drill to make a hole through the crack. Make sure the hole is big enough for the bolt to fit through.
Apply some epoxy glue on both sides of the crack and around the hole.
Insert the bolt through the hole and secure it with the nut. Tighten it with the pliers.
Reassemble the base and attach the ball head back on.
Let the epoxy glue dry completely before using your Malty Simple Camera Rig again.
Congratulations! You have successfully fixed your Malty Simple Camera Rig that cracked. Now you can enjoy using it for your photography or videography projects without worrying about it breaking again.
If you want to prevent your Malty Simple Camera Rig from cracking in the future, here are some tips to follow:
Do not over-tighten the knob that secures the ball head. This can put too much stress on the base and cause it to crack.
Do not use your Malty Simple Camera Rig with heavy cameras or lenses. The maximum load capacity of the rig is 3 kg (6.6 lbs). Exceeding this limit can damage the rig and your equipment.
Do not expose your Malty Simple Camera Rig to extreme temperatures or humidity. This can weaken the plastic material and make it more prone to cracking.
Store your Malty Simple Camera Rig in a dry and cool place when not in use. Avoid leaving it in direct sunlight or in your car for long periods of time.
By following these tips, you can extend the lifespan of your Malty Simple Camera Rig and enjoy its benefits for a long time.
If you are looking for a reliable and affordable camera rig, you can check out the Malty Simple Camera Rig on their website or on Amazon. It is compatible with most cameras and devices and comes with a one-year warranty. You can also find more reviews and tutorials on their YouTube channel or their blog. ec8f644aee